• 
• 
• 
• 
• 
• 
• 

That's how:

• We Sand Each Floor Minimum 5 Times
• We Use The Best German Dustless Machines
• All Tradesmen Are Skilled, Qualified, Experienced & Polite
• We Start & Finish All Jobs On Time
• We Only Use The Best National Brand Name Polyurethanes & Non Shrinkable Wood Fillers
• We Guarantee Our Workmanship For 12 Months
• We Offer Obligation Free Quotes & Advice
• Our Prices Are Very Competitive & Start At $18/m²

Strip Flooring

Installation of timber strip flooring

Provided below are some specifications to keep in mind when installing your strip flooring, laminated flooring or one of our other flooring products. Fitting together with a tongue and groove joint, our Strip floors are generally of a solid timber or a laminated product made by bonding together layers of timber. Once your Astoria floor has been laid it is then sanded down and finished. There are still a number of excellent flooring products, including parquetry, pre-finished floors and 'floating' flooring systems that are not covered in our steps.

Aspects to be considered when installing your Strip Flooring include the following:

• Design of the space
• Appearance of the floor once finished
• The environment in which the floor is to be placed

With these aspect in mind you are able to make a wiser choice of cover width, fixings, species and finishes.

Information regarding product selection, assessing installation environment, sanding, finishing and floor installation as well as important information required by your Astoria Floors installer or sander and finisher can be gathered by following our steps.

THE STRIP FLOORING PROCESS

Strip Flooring is available in a variety of species colours, profiles, cover widths and soft or hard timbers. Prior to the floor being finished a number of steps need to be taken to deliver your new Strip Floor the with utmost professional standard in both appearance and performance.

Each stage is of equal importance and Astoria Floors takes great care during every stage to deliever the highest quality flooring.

• Manufacture - Done via a saw mill, however rough swan boards may be machined to a finish
• Distribution - Purchased by the Astoria Floors at timber merchants
• Specification - Owners, designers, architects and our qualified Astoria Floors personel will specify the amount and the type of product to be installed
• Sub-floor - Joists, Bearers or slabs are provided by builders to which the floor is later laid.
• Installation - Qualified specialist floor installers and carpenters will install the floor over the builder's sub-floor.
• Sanding and Finishing - Professional floor sanders and finishers will complete the final touches to the floor.